240Z HueForge

Project: 240Z.hfpPrint at 100% infill with a layer height of 0.09mm with a base layer of 0.2mm The Model is 220x137.5mm in sizeYou may print at higher layer heights below the Base Thickness of 0.56mmThe Max allowed Thickness is 2.54mm and the Actual Thickness is 2.54mm Filaments Used:#000000 PLA BambuLab Basic Black Transmission Distance: 0.6#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3#8c9099 PLA PolyLite Grey Transmission Distance: 1#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #8 (0.74mm) swap to Blue GrayAt layer #18 (1.37mm) swap to GreyAt layer #28 (2mm) swap to Jade White for the rest.