Thingiverse
fidget spinner for 625 bearings
by ElaDov
11
Downloads
2
Likes
0
Makes
this is a nice and simple model for a 3 legged fidget spinner for 625 sized bearings which are commonly used on 3d printers.
to make this spinner, you will need to print:
1X fidget spinner.stl
2X spinnerCap.stl
you will also need 4X 625 size bearings.
the cap should be printed upside down (top down);
assembly:
the bearings and caps need to be hammered in to place, without damaging the bearings.
1.after printing, put the spinner on a flat surface, take one bearing and place it on one
to make this spinner, you will need to print:
1X fidget spinner.stl
2X spinnerCap.stl
you will also need 4X 625 size bearings.
the cap should be printed upside down (top down);
assembly:
the bearings and caps need to be hammered in to place, without damaging the bearings.
1.after printing, put the spinner on a flat surface, take one bearing and place it on one
Sign in to leave a comment
Sign in