Thingiverse
Filament Force Sensor
by dagnall53
45
Downloads
32
Likes
0
Makes
This is a Bowden filament force sensor that can be used to explore details of your printer setup.
It comprises:
Two 10kg load cells ( Size:80x12.7x12.7mm)(M4one end, M5 at the other end)
Two M5 Pneumatic couplers
One HX711 ADC module
One NodeMCU V2.
Two 28mm M4 bolts plus screws.
The code for the NodeMCU can be found here: https://github.com/dagnall53/dEEbugger_PUBLIC/tree/patch-2
Use 28-30mm screws to connect the two sensors, and 8mm screws to connect the "opposite" housing.
It comprises:
Two 10kg load cells ( Size:80x12.7x12.7mm)(M4one end, M5 at the other end)
Two M5 Pneumatic couplers
One HX711 ADC module
One NodeMCU V2.
Two 28mm M4 bolts plus screws.
The code for the NodeMCU can be found here: https://github.com/dagnall53/dEEbugger_PUBLIC/tree/patch-2
Use 28-30mm screws to connect the two sensors, and 8mm screws to connect the "opposite" housing.
Sign in to leave a comment
Sign in