Thingiverse
Two piece quad frame
by onmeow
16
Downloads
17
Likes
0
Makes
Simple two piece quad frame.
The frame is 170mm and uses 4" props. (in my case 4045 4-blades)
I wanted a frame for some old 1806 motors and other disused parts.
But any motors that can swing a 4" prop and matching ESC and FC will do.
The height 8 standoffs needs to be adapted to match the height of the PDB and any components below it.
I used the following parts.
DYS BE1806
https://www.banggood.com/DYS-BE1806-2300KV-Brushless-Motor-Black-Edition-for-Multicopters-p-946416.html
Naze3
The frame is 170mm and uses 4" props. (in my case 4045 4-blades)
I wanted a frame for some old 1806 motors and other disused parts.
But any motors that can swing a 4" prop and matching ESC and FC will do.
The height 8 standoffs needs to be adapted to match the height of the PDB and any components below it.
I used the following parts.
DYS BE1806
https://www.banggood.com/DYS-BE1806-2300KV-Brushless-Motor-Black-Edition-for-Multicopters-p-946416.html
Naze3
Sign in to leave a comment
Sign in