Thingiverse
E3D V6 mount with 40mm fan for CR-10
by Anzymanz
327
Downloads
184
Likes
0
Makes
This is a combined hot end and fan mount I designed for an E3D V6 hot end on the Creality CR-10.
I also made sure this will work with the 50mm fang bracket: https://www.thingiverse.com/thing:2197329
I used nylon standoffs to get the part cooler in the correct position with the fang part cooler.
You will need two M3 bolts ~ 8mm in length to secure the bracket, and six of either M3 or M2.5 bolts ~ 15mm in length to secure the fan to the duct, and the duct to the bracket.
You will need to
I also made sure this will work with the 50mm fang bracket: https://www.thingiverse.com/thing:2197329
I used nylon standoffs to get the part cooler in the correct position with the fang part cooler.
You will need two M3 bolts ~ 8mm in length to secure the bracket, and six of either M3 or M2.5 bolts ~ 15mm in length to secure the fan to the duct, and the duct to the bracket.
You will need to
Sign in to leave a comment
Sign in