Prusa I3 Rework BODY-EXTRUDEUR-WADE-1.75mm for E3D-V6

After having to replace my real J-Head with an E3D-V6 clone I had to redo the extruder portion since the real J-Head is smaller and used a completely different approach.

The approach I used was to use some PTFE tubing shoved into the hotend all the way into the extruder where it butts up against the 2mm filament hole. This worked flawlessly but if you ever have to remove the hotend (which will rarely, if ever, be done in reality) it will demand the removal of the heater block then grab the P