Thingiverse
24mm Cherry MX Arcade Button
von Nibato
43
Downloads
32
Likes
0
Makes
This is a 24mm arcade button housing, nut, and cap using a cherry MX Switch.
The tolerances are a bit tight on the threads, 0.1mm layer height is a requirement, and the STL was mostly adjusted for my own 3D printer. You may have to play with your printer settings to get it to thread properly.
Wires will need to be soldered onto the Cherry MX switch itself.
The tolerances are a bit tight on the threads, 0.1mm layer height is a requirement, and the STL was mostly adjusted for my own 3D printer. You may have to play with your printer settings to get it to thread properly.
Wires will need to be soldered onto the Cherry MX switch itself.
Nibato veröffentlicht auch auf
3 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
