250x140sunlitbed

Project: 250x140sunlitbedPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 140.63x250mm in sizeYou may print at higher layer heights below the Min Depth of 0.4mmThe Max Depth is 2.6mm and the Actual Depth is 2.7mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 6.7 PLA BambuLab Basic Red Transmission Distance: 11 PLA BambuLab Basic Yellow Transmission Distance: 11 PLA BambuLab Basic Jade White Transmission Distance: 11This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #4 (0.4mm) swap to Red At layer #9 (0.8mm) swap to Yellow At layer #22 (1.84mm) swap to Jade White for the rest.