Thingiverse
Printrbot Simple 2014 Bowden Extruder Conversion
by jhoff
65
Downloads
31
Likes
1
Makes
*** Work in progress ***
Working on a bowden conversion for the 2014 model of printrbot simple. This mod will take the extruder motor weight off of the Y axis and allow for faster, less shaky prints. The tip of the ubi hot end should be in the same position as before, so the existing fan shroud will still work.
Besides the printed parts, you'll need about $12 in parts ( I got mine from amazon ), some machine screws and some m3 bolts and nuts ( I used some leftover from my printrbot ). Link
Working on a bowden conversion for the 2014 model of printrbot simple. This mod will take the extruder motor weight off of the Y axis and allow for faster, less shaky prints. The tip of the ubi hot end should be in the same position as before, so the existing fan shroud will still work.
Besides the printed parts, you'll need about $12 in parts ( I got mine from amazon ), some machine screws and some m3 bolts and nuts ( I used some leftover from my printrbot ). Link
Sign in to leave a comment
Sign in