Flitetest Tiny Trainer Fuselage

This is a fuselage, firewall replacement for the Flitetest Tiny Trainer. The nose of the plane is two inches shorter but plenty of room for batteries. I have flown this and had very good success. Parts should be CA glued together. The hatch has a hole for a magnet. Print settings as follows.
1 perimeter, 2 top 2 bottom layers with 5% infill. Firewall is 3 perimeter and 20 infill. Cowling is 3 top, 2 bottom and 10% infill. Makes the plane just a bit heavier but not much