Qidi Tech 1 Extruder Cable & PTFE Guide Tube Spacer

Redesigned parametrically, and from scratch in Autodesk Fusion 360

I have included three sizes. For the stock Qidi Tech 1, use the 48x26mm spacer.

If you are using my full replacement guide tube assembly (https://www.thingiverse.com/thing:2848195) then this brings the tubes closer together (34mm, the same distance as between the two nozzles - logical really!) then download the 34x26mm spacer for the rear, and optionally use the longer 34x42mm spacer for inside the hood, since (at least wit