Thingiverse
MK8 extruder carriage with 3D Touch bracket (CTC Prusa i3 DIY Clone)
by Leeb65
24
Downloads
25
Likes
0
Makes
This is an upgrade for the CTC Prusa i3 DIY which allows the use of a MK8 extruder as shown in the pictures (£19.95 on eBay).
The only modification to the wiring is the middle 2 wires to the stepper motor need to be reversed. the print head sits about 1.5 cm left of the original location and so gives a larger print than the original.
The bracket for the 3D touch was part of the design as the CTC has nowhere for a bed leveling sensor to be fitted. This does require a firmware upgrade for t
The only modification to the wiring is the middle 2 wires to the stepper motor need to be reversed. the print head sits about 1.5 cm left of the original location and so gives a larger print than the original.
The bracket for the 3D touch was part of the design as the CTC has nowhere for a bed leveling sensor to be fitted. This does require a firmware upgrade for t
Sign in to leave a comment
Sign in