Thingiverse
Picatinny Rail - MantisX
by Beet
32
Downloads
20
Likes
0
Makes
Picatinny rail mount for MantisX accessory.
Tested on: Feinwerkbau AW93 (mounted on weight) and Tanfoglio Limited (mounted on side screw holes)
Should fit any firearm with 20mm spacing for m4 screws.
Designed to use M4x16 pan head screws.
** Please take care with guns like the Tanfoglio limited where the screw holes goes through the frame, that the selected screws don’t go too far and interfere with the barrel, put washers in-between if necessary to keep the screws away from the barrel. **
Tested on: Feinwerkbau AW93 (mounted on weight) and Tanfoglio Limited (mounted on side screw holes)
Should fit any firearm with 20mm spacing for m4 screws.
Designed to use M4x16 pan head screws.
** Please take care with guns like the Tanfoglio limited where the screw holes goes through the frame, that the selected screws don’t go too far and interfere with the barrel, put washers in-between if necessary to keep the screws away from the barrel. **
Sign in to leave a comment
Sign in