Paper cup holder thingy!

This Item was printed in: REAL-Filament's Light Blue PLA ø2.85.

Print Time:

Print Settings
Quality
Layer height: 0.25mm

Shell
Wall Thickness: 1.05mm
Top/Bottom Thickness: 0.8mm

Infill
Infill Density: 30%
Infill Pattern: Grid.
Infill Overlap Percentage: 20%
Skin Overlap Percentage: 20%

Speed
Print Speed: 60mm/s.
Travel Speed: 120 mm/s.

Support
Enable Support: No

Build plate Adhesion
Build plate adhesion type: None.