Walker Foot/Glide for 1 1/8th inch leg

This is a set of feet for a walker.

I hurt my spinal cord pretty bad, so have a walker for a while. (Do not recommend, but mostly not paralyzed, so that's nice.)

These are intended to be printed in ABS with a bottom layer thickness of 10MM. If your slicer doesn't let you do that, print solid. I do 10mm bottom layers with 30% fill, 5 top layers (not mm) and 2 perimeter layers.

There is a tiny rib on the outside as a tattle tale of how much of the 10MM base is left. When you hit the l