Big drill box 0.4 - 10 mm

I couldn't find a suitable box for all my drill bits, so I designed my own. For the lid I adapted this design: . I tested it before and it really closes good - not too tight and not too loose.

For the different colors I manually added some M600 filament codes into the gcode. For the lids there are two filament changes: at 0.6 and at 1.2 mm, for the boxes four: 56.8, 57.8, 61.8 and 62.8 mm. This is with a layer height of 0.2 mm.
In my own print (see photo), the text on the side was a bit too