VW Beetle Front Bumper Gasket

Printed on HINOFLEX material

PLA=1.75 material size
0.4 nozzle
0.4 quality
Temp=190

No bed TEM

Maximum speed 40mm/s

- Infill 5%

rectilinear fill

- 2 layers for top, 3 layers for Bottom

- 3 perimeters

- First 3 layers at 195 Degrees, after that 185 Degrees

Printrbot Simple Metal

printed in two single parts, than glued using the same HINOFLEX filament melted at 210 Degrees