CR-10 stabiliser and support

It stops the 'drop' on the X carriage and means you don't have to get motor lead screw wire etc. It's just another option


READ INSTRUCTIONS FULLY FIRST, READ THEM AGAIN.

Print the parts.

List of parts needed to fit it

8 x 5mm T Nuts
8 x 5mmx10 dome socket head screws
2 x 5mmx35mm Socket head screws
1 x 5mmx40mm Socket head screw
6 mm washers
3 5mm nuts
3.2mm Drill To clear the holes out on the bearing bracket
2 LM8 linear bearings.

8mm ROD 570mm long (Pick your own ty