Thingiverse
Automatic knife
by Shankman
139
Downloads
115
Likes
1
Makes
https://youtu.be/kANP4qNV07I
These should be printed in PLA for best results. PLA provides for rigidity
and a slippery surface that allows the blade to slide freely
top & bottom-2 perimeters 25% infill, 0.25mm layer
blade,catch and blade pin---3 perimeters 30% infill, 0.25mm layer
requires 3 short pieces of 3mm filament approx 15mm long
4 each M3 x 20 Socket head cap screw & nut.
not all rubber bands are created equal. the better ones to use
are the Plastibands, orthodonti
These should be printed in PLA for best results. PLA provides for rigidity
and a slippery surface that allows the blade to slide freely
top & bottom-2 perimeters 25% infill, 0.25mm layer
blade,catch and blade pin---3 perimeters 30% infill, 0.25mm layer
requires 3 short pieces of 3mm filament approx 15mm long
4 each M3 x 20 Socket head cap screw & nut.
not all rubber bands are created equal. the better ones to use
are the Plastibands, orthodonti
Sign in to leave a comment
Sign in