1/10 Scale rolling motor stand

This stand is designed and made for the 1/12 scale motor by Dblnaknak and Novel Creations. Its printed in PLA at 30% infill. It assembled using 2mm and 3mm screws. The bearings I used was 10x3x4mm for the front wheels, 8x3x3mm for the spindle, 5x2x2.5mm for the front caster mounts, ans 6x3x2.5mm for the rear wheels. The front wheels are the 10x3x4mm bearings. I had those bearings lying around so that is what was used. You can source them via the internet or If you dont have those bearings you mu