Thingiverse
Ampersand lamp
by Plastmartin
62
Downloads
58
Likes
1
Makes
About 200mm in height, 41mm depth.
The ampersand is printed in PLA
The LED bulbs is printed in Colorfabb nGen Clear
Battery box is PETG with OA:s recommended layer height of 0.25mm
LED (wharm white): https://www.kjell.com/se/sortiment/el-verktyg/elektronik/optokomponenter/lysdioder/lysdiod-5-mm-varmvit-p90729
I found the sweet spot for the LEDs at about 5mA, that is 1kOhm at 5 volts.
Original spec: 20mA
The threads in PLA works quite well, I cleared them with a thread tool just beca
The ampersand is printed in PLA
The LED bulbs is printed in Colorfabb nGen Clear
Battery box is PETG with OA:s recommended layer height of 0.25mm
LED (wharm white): https://www.kjell.com/se/sortiment/el-verktyg/elektronik/optokomponenter/lysdioder/lysdiod-5-mm-varmvit-p90729
I found the sweet spot for the LEDs at about 5mA, that is 1kOhm at 5 volts.
Original spec: 20mA
The threads in PLA works quite well, I cleared them with a thread tool just beca
Sign in to leave a comment
Sign in