Wanhao i3 plus Y axis rod alignment jig

*Update 07 Dec 2018: Added V1.2 with chamfer edges and thinner profile (prints faster).

Basic jig to align y axis rods to the body of the printer.

1. Loosen the rod holders at each corner

2. insert the jig under the rods

3. Add M3 washers to the screws

4. Tighten the screws while pushing the rod and jig towards the body of the printer

5. Slide out the jig and repeat for other corners. (Or print 4 and use at each corner)

6. (Optional) Drill out the holes on the printer fra