Epoxy mixing cup

This is a very simple epoxy mixing cup, fast and cheap to print. There are two parts: the cup and the divider. The cup is printed in vase mode (one continuous vertical layer), you can print it at the fastest setting of your printer (0.35mm or 0.4mm). The divider should be printed at 0.2mm. Insert the divider to create the desired epoxy mixing ratio: I made this for the XTC-3D 3D Print Coating epoxy, which mixes at 2:1, so I bend the divider at the middle crease to 120 degrees; for 1:1 mixes just