Thingiverse
Nori Feeder
by Zephrant
195
Downloads
99
Likes
0
Makes
This Nori feeder is easily printed in five parts. The back, front grid, and magnet cover for inside the tank, and the corresponding outside-tank magnet enclosure.
It is designed for the 32mm x 2mm magnets commonly available online.
One half sheet tall (3.9", 10cm) by one strip wide (2.75"/7cm), this feeder can fit 8-10 sheets for your hungry critters.
With one magnet on each side, it will work on glass/acrylic up to 3/8" thick.
For thicker material, use the double magnet cover and two
It is designed for the 32mm x 2mm magnets commonly available online.
One half sheet tall (3.9", 10cm) by one strip wide (2.75"/7cm), this feeder can fit 8-10 sheets for your hungry critters.
With one magnet on each side, it will work on glass/acrylic up to 3/8" thick.
For thicker material, use the double magnet cover and two
Sign in to leave a comment
Sign in