P3 Steel Y Bed Tensioner Holder Mount GT2 1.75mm steel cord belt

P3 Steel Y Bed belt tensioner and Y Bed belt mount. The tensioner should work for many belt types .. but the Y bed mount is sized specifically for the thicker 1.75m thick GT2 belt with steel cording. This type belt requires running very high belt tension, system must be designed to handle those loads.

Belt tensioner is designed in 2 pieces, to reduce tensile loads on print layers (weak direction). Note the spacer that is used on each end of the 5mm diameter by 22mm long axle shaft. 3 Housing