Thingiverse
K40 Laser Cutter Air Assist Nozzle with Laser Diode Mounts
by dapol
7
Downloads
7
Likes
0
Makes
This is an Air Assist nozzle for the K40 Laser cutter which has 2 mount points for 6mm laser diodes.
The diodes are mounted on articulated mounts which attach to the nozzle by means of an M3x10 screw through the nozzle and the diode mount. I'm using zip-ties to secure the laser diodes to the mounts for testing. I'll be drawing power from the LED lighting strip connector, through a 5V power regulator (3.3V would be better) with the laser diodes running whenever the LED lighting is on.
The u
The diodes are mounted on articulated mounts which attach to the nozzle by means of an M3x10 screw through the nozzle and the diode mount. I'm using zip-ties to secure the laser diodes to the mounts for testing. I'll be drawing power from the LED lighting strip connector, through a 5V power regulator (3.3V would be better) with the laser diodes running whenever the LED lighting is on.
The u
Sign in to leave a comment
Sign in