Plane

This is really fast project you can do. This plane designed to fly! Almost no cost required. Fave fun!

Materials:
1x straw with 5mm diameter and a length between 7-8 inches or 18-21 cm;
1x Nut with 5mm inner diameter (N10);
3x or more plane suport frame (STL file);
1x A4 cardboard with ~0.6mm thickness;

First you need to put plane's supports on straw. Then print, cut and put the wings on the frame. You can put duck tape or super glue on wings to make sure they do not came off with cra