Thingiverse
DJI Spark extended landing gear
106
Downloads
91
Likes
2
Makes
My version of extended landing gear for the DJI spark. I made these as a two piece design for ease of printing.
Requires 3 M2 x 6mm bolts per leg
Insure the motor mount holes are cleared out to be a true clearance hole and use the bolt to tape into the lower leg. I used a 1.5mm drill bit to help clear out the holes that need to self tap. I also used CA glue to help secure the two parts, they should never come apart. You could also probably use a nut if you think it would be more secure, i
Requires 3 M2 x 6mm bolts per leg
Insure the motor mount holes are cleared out to be a true clearance hole and use the bolt to tape into the lower leg. I used a 1.5mm drill bit to help clear out the holes that need to self tap. I also used CA glue to help secure the two parts, they should never come apart. You could also probably use a nut if you think it would be more secure, i
Sign in to leave a comment
Sign in