1/24 Twin Motor mount/center skid/box ECX RGT FTX Barrage

***Improved V2 here***
https://www.thingiverse.com/thing:2776203/#files





This is to mount two gear reduction motors in an ecx barrage or like rc crawler. Greatly slows it down for much more controlled crawling. Big improvement over stock. You have to either shorten the drive shafts or motor shafts slightly. Also you need to shave the links that mount under the motors. Uses factory hardware. No need to use screws to mount the motors. I used 300rpm motors. You can use the factory esc. A