SocketWrench 1/4" 13mm

This Item was printed in: REAL-Filament's White PLA ø2.85.

Why did I print it?: Just because I wanted to see if it would work, AND IT DID!

Print Settings
Quality
Layer height: 0.15mm

Shell
Wall Thickness: 1.8mm
Top/Bottom Thickness: 1.8mm

Infill
Infill Density: 100%
Infill Pattern: Grid.
Infill Overlap Percentage: 20%
Skin Overlap Percentage: 20%

Speed
Print Speed: 70mm/s.
Travel Speed: 120 mm/s.

Support
Enable Support: Yes.
Support_Placement: Touching Buildplate
S