Thingiverse
Positioning Jig for Gardco Buchholz Indendation Tester BH2000
by reedz1
0
Downloads
0
Likes
0
Makes
This is a positioning jig for the Gardco: Buchholz Indentation Tester BH2000.
https://www.gardco.com/pages/hardness/buchholz_BH2000.cfm
In my experience, using the provided marking template was problematic and lead to a high variability in data. This jig, when printed at 100% will not interfere with the force placed on the test surface by the indentor and will place the provided microscope approximately 0.5 mm above or below the scale for easy reading.
To use this jig reliably I would s
https://www.gardco.com/pages/hardness/buchholz_BH2000.cfm
In my experience, using the provided marking template was problematic and lead to a high variability in data. This jig, when printed at 100% will not interfere with the force placed on the test surface by the indentor and will place the provided microscope approximately 0.5 mm above or below the scale for easy reading.
To use this jig reliably I would s
Sign in to leave a comment
Sign in