Precision-Piezo Probe with 3 Piezo 15mm

Without groovemount, the probe from precision-piezo is harder to use.

And Drilling the piezo is a "not optimal" operation.

So I tried to use 3 smaller piezo disks instead of one bigger that is drilled.

The piezo needs to be isolated from the heatsink. a little bit of kapton is nice.

The 3 piezo are sensitive enough in compression.

Needs to be printed with a layer height of 0.1 or 0.05 (if bigger, you'll lose the Piezo marks)

You just have to slide the part between the heatsink