50mm x 50mm x .4mm Bed Level Test Print

Made this to help level my MPSM, using .13125-.175mm layers.

Generally, print this up to .175, it's optimized for .13125 but really there isn't much difference. If you've got ANY gaps, any less-than-perfect lines, ANY corner raising, RAISE that corner by ~1/8" turn, meaning move the bed CLOSER to the nozzle.

If you've got any scraping, any scratching of the nozzle any layers, LOWER that corner by ~1/8".

You should get 3 layers here. Adjust on the fly and by the time it's done you should