Hitron CODA-4582 Wall Mount

This is a wall mount for the Hitron CODA-4582 (Rogers Gigabit) modem. The holes are 3.8mm so an M3 screw or #6 screw will work. Drywall screws fit as well. I used 3M Command strips (3lb spec) as well to extra holding strength.

EDIT: 5/02/20
Re-designed both elements as I learn F360. Optimized for material use; cutting down filament (by almost 1/2) and print time. I do recommend using the Halo.

Base:
New: 72g | 4hr 02m (25% infill and 0.35 layer)
Old: 143g | 5hr 55m

Halo:
New: 31g