DreamPi - Raspberry Pi B+ / 2 / 3 Case With Cooling Fan

Iconic Sega Dreamcast Case for Raspberry Pi B+ / 2 / 3
Fits with a 30mm x 30mm x 10mm Cooling Fan (Refer to GPIO Pins for Power Source)

Requirements :
Cooling Fan : 4 Screws + 4 Nuts
Raspberry Pi : 4 Screws
Case : 2 Screws

You must use a Raft + Supports to print the Top part (cannot be printed without supports) / You must use a Raft to print the Bottom Part. If you don't use rafts (or a heatbed), the deformations (warping) will be visible when you assemble the case.
All the little par