Noozle Cleaning Brush Corner

Made for 6mm bed thickness (bed + 3mm glass).
It allows to hold up to 3 dremel type brass brush.

The STL is for front right corner.

In Marlin, just enable the
NOZZLE_CLEAN_FEATURE

And set the positions according to your own endstop positions
Mines are
NOZZLE_CLEAN_START_POINT { 195, -15, (Z_MIN_POS + 15)}
NOZZLE_CLEAN_END_POINT { 210, 0, (Z_MIN_POS + 15)}

Then in your slicer, use
G12 P2 R6.5 S5 (for example)

in your GCODE starting sequence


https://youtu.be/PzPdNW_Ul