Thingiverse
Eggbot_Remix_DJ
by DamonJones
7
Downloads
7
Likes
0
Makes
0000002.Case_Top-Remix_DJ.stl:
Removed Logo Mounting Holes. Provides smoother printing.
0000016.Hand_H-Remix_DJ.stl
Increased the width of the hinge tab to closely fit into the other part. Eliminates slop in hinge.
Also decreased the hole size to 1.9mm. Printed at 101.5% scale in ABS+. I then ran a #48 drill bit through the hole for a perfect fit on a 2mm X 20mm screw. The smaller screw provides less slop and less area for friction so the hinge works much better now.
0000017.Hand_V-Rem
Removed Logo Mounting Holes. Provides smoother printing.
0000016.Hand_H-Remix_DJ.stl
Increased the width of the hinge tab to closely fit into the other part. Eliminates slop in hinge.
Also decreased the hole size to 1.9mm. Printed at 101.5% scale in ABS+. I then ran a #48 drill bit through the hole for a perfect fit on a 2mm X 20mm screw. The smaller screw provides less slop and less area for friction so the hinge works much better now.
0000017.Hand_V-Rem
Sign in to leave a comment
Sign in