5S to 9v Voltage Reducer for FatShark Goggles

This is a case designed to hold an XT60 connector and 24v to 9v voltage reducer. I've been using 6S batteries after I've flown with them. This puts their voltage down under 24 volts. 9v works great with FatShark goggles without providing too much input power. I cut a 90 degree plug from an old router power cable and wired. I verified it fit into the FatShark goggles and cut it off as long as I could. I soldered it to the "out" side of the voltage reducer. I used 18 (or 20) AWG wire to con