CR-10 Y Motor Stiffening Bracket

Requires :
1x m4 10mm bolt and t nut
4x m3 40mm bolt - without dampener

Installation:
1) Loosen Y belt
2) Loosen motor bolts on frame
3) Remove bolts at the back of motor
4) Attach bracket to frame with m4 and t nut, do not tighten yet
5) Attach bracket to motor using the 4 m3 bolts, check alignment while tightening
6) Tighten motor bolts to frame, check alignment
7) Tighten bracket bolt to frame
8) Tighten Y belt