Thingiverse
Anet A8 Belt Tensioner and Brace Y-Axis
by Digital_Sqrt
86
Downloads
42
Likes
0
Makes
ANET A8 BELT TENSIONER and BRACE Y-Axis
We have installed and tested the parts. Everything fits perfectly.
The M5 nut trap is very tight. Position the nuts in front of the traps and then use the 30mm screw to draw them in.
When the belt is taught - thread lock can be added to the nut/bolt to secure it in place.
Warning - the STL file loads into Cura slightly tilted. Make sure you "Lay-Flat" before you print. We are looking at fixing this in the future. But for now it can be fi
We have installed and tested the parts. Everything fits perfectly.
The M5 nut trap is very tight. Position the nuts in front of the traps and then use the 30mm screw to draw them in.
When the belt is taught - thread lock can be added to the nut/bolt to secure it in place.
Warning - the STL file loads into Cura slightly tilted. Make sure you "Lay-Flat" before you print. We are looking at fixing this in the future. But for now it can be fi
Sign in to leave a comment
Sign in