Glass Hold-Down Clip for FT-5

This is a glass hold-down clip made for the Folgertech FT-5 R2 printer. It holds a 12" x 12" x ~0.11" mirror tile down to the stock heated bed, using the corner height adjustment screws. The clearance under the top lip of the part is just smaller than the thickness of the glass I have, so it positively clamps it down to the bed (at least with the force available from the spring). It sits 0.1" (2.54mm) above the glass, and is low enough to clear my Backpack Part Cooler design found here: https