Thingiverse
Wemos D1 OLED ComboSBS (Side by Side) case
by Spiritdude
34
Downloads
19
Likes
0
Makes
Wemos D1 OLED ComboSBS (Side-By-Side), OLED combined with Wemos D1 Mini.
Hot-glue Wemos D1 aside of the OLED 128x64 SSD1306. Wire it as you like (SCK and SDA), GND to GND, and VCC to 3.3V Wemos.
If you like to have a Reset button, print the small item.
Note: you printer must be well calibrated X/Y and extrusion flow, if the cover won't fit nicely file the cover guides and/or the inside of the bottom case.
Nozzle: 0.4mm
Layer height: 0.2mm (or less)
Electrical wiring described a
Hot-glue Wemos D1 aside of the OLED 128x64 SSD1306. Wire it as you like (SCK and SDA), GND to GND, and VCC to 3.3V Wemos.
If you like to have a Reset button, print the small item.
Note: you printer must be well calibrated X/Y and extrusion flow, if the cover won't fit nicely file the cover guides and/or the inside of the bottom case.
Nozzle: 0.4mm
Layer height: 0.2mm (or less)
Electrical wiring described a
Sign in to leave a comment
Sign in