Thingiverse
Solution for printing on glass with the Tevo Tornado.
by Baard
170
Downloads
91
Likes
1
Makes
This solution makes it very easy to mount and remove the glass plate.
The nozzle should not come in contact with any of the parts because of their low height and because they are not within the printing area or the homing area.
You need:
A glass plate. Sizes are shown in thing files.
An M2.5 screw 5-10mm.
2 pcs 10x15x4mm bearings. (6700ZZ)
The bearings and the washers prevents the bed level from changing when moving the front levers. They also make leveling smoother, so they can be used
The nozzle should not come in contact with any of the parts because of their low height and because they are not within the printing area or the homing area.
You need:
A glass plate. Sizes are shown in thing files.
An M2.5 screw 5-10mm.
2 pcs 10x15x4mm bearings. (6700ZZ)
The bearings and the washers prevents the bed level from changing when moving the front levers. They also make leveling smoother, so they can be used
Sign in to leave a comment
Sign in