Tronxy X5s integrated housing

Lower, left and right plywood are connected to the frame of the printer.
The top plywood is fixed on hinges, so you can open the top of the housing.
Left and right plywood is attached to the front and back plywood.
The inside temperature is very stable.
The printer is quieter by 5dB.
You do not smell ABS during printing.

plywood 4mm:
upper - 507mm x 588mm
left/right - 718mm x 499mm
front/back - 718mm x 588mm
plywood 12mm:
bottom - 507mm x 588mm

I enclose a project made in Design