Mercedes ML W163 headlamp lid

Lost a headlamp lid from my Mercedes ML270 W163, so had to print a new one.

MercedesLid_1.stl : PETG / ABS, 5 perimeters, 50% infill (this should be strong enough)
MercedesLid_2.stl : PETG / ABS, 2 perimeters, 10% infill

MercedesLid_rubber.stl: any flex material, 3 perimeters, 10% infill

Post processing:
- Glue together Mercedes_Lid1 and Mercedes_Lid2 parts
- Remove support under hooks in Mercedes_Lid2 part
- Push rubber part inside (might be tight)