DanO's BIg O Extruder

This is a Geared extruder I designed to be compact.
The gear ratio is 1:5.22
Printed with PLA

You will need
2x 609zz bearings
1x 5mmX70mm bolt
8x 3mm screws
4x 3mm nuts

Print with supports except for the large gear (causes binding if not cleaned fully)

Assembly
0. If you are mounting to a base Do it now
1. Press in Bearings
2. Attach drive gear to the motor. align gears.
3. Assemble large gear assembly.
4. Add the motor to the housing. Do not tighten.
5. Align gears.
6.