MakerWorld

Creatures

28MM Dragon Man

by MarkM · Creatures

3 Downloads

2 Likes

0 Makes

Pictures are of the figure straight as he came off the printer, with no post processing other than removing the supports. He was printed at .08mm layer height with a .2mm nozzle, with 15% infill, on an A1 Mini, in Silent mode. I recommend printing with 100% infill, at least for the wings.

tabletop rpg dungeon and dragons 28mm dragon dragon man

Category

Creatures

Source

MakerWorld

Published

23.04.2024

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed · 0.08mm layers

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 2/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Layer height

0.08 mm

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for 28MM Dragon Man?

Any FDM printer should handle 28MM Dragon Man just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does 28MM Dragon Man need supports when printing?

Yes, 28MM Dragon Man will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is 28MM Dragon Man available in?

28MM Dragon Man is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is 28MM Dragon Man free to download?

Yes, 28MM Dragon Man is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

28MM Dragon Man

Similar Models

Add to Collection