Thingiverse
Shark Fin Antenna Saver
by skyraccoon
61
Downloads
40
Likes
1
Makes
Used to protect antenna on RC glider or plane.
Printed with Polyflex at 220°C and 60mm/s on a 50°C heated bed.
1st Version:
The hole in your model fuselage should be 6mm long and 4mm wide to be able to attach the tooth on your fuselage.
2nd Version:
No need to drill a big hole in the fuselage, this one can simply be taped with a double face tape.
(You can also print in PLA but TPU is better)
Printed with Polyflex at 220°C and 60mm/s on a 50°C heated bed.
1st Version:
The hole in your model fuselage should be 6mm long and 4mm wide to be able to attach the tooth on your fuselage.
2nd Version:
No need to drill a big hole in the fuselage, this one can simply be taped with a double face tape.
(You can also print in PLA but TPU is better)
Sign in to leave a comment
Sign in