Thingiverse
Mini retract unit for RC planes
by tahustvedt
173
Downloads
108
Likes
0
Makes
A mini retract unit for RC planes.
Trunnion01 is an 85° trunnion.
Trunnion02 is a 90° trunnion.
Trunnion03 is a 95° trunnion.
Retractbase02 has a large base for spreading the load under foam wings.
Remove the support blocks shown in the illustration from the trunnions and the retract bases after printing, with pliers. It's easy to remove.
Use 1,5 mm or 1,6 mm (1/16") steel wire through the arm and trunnion as hinge and guide pins. Use a 1,5 or 1,6 mm drill in the holes first if th
Trunnion01 is an 85° trunnion.
Trunnion02 is a 90° trunnion.
Trunnion03 is a 95° trunnion.
Retractbase02 has a large base for spreading the load under foam wings.
Remove the support blocks shown in the illustration from the trunnions and the retract bases after printing, with pliers. It's easy to remove.
Use 1,5 mm or 1,6 mm (1/16") steel wire through the arm and trunnion as hinge and guide pins. Use a 1,5 or 1,6 mm drill in the holes first if th
Sign in to leave a comment
Sign in