Cover for Lerdge USB addon - East 3D Gecko

Things you'll need:
- M3x8 screws - 3pcs
- M3 nuts - 3pcs
- M3x16 screws - 2pcs
- angled USB connector - 1pcs

Use the M3x8 screws to install the baseplate to the front of the printer. The screws fit the holes of the 4010 cooler of the Lerdge board.
Install the USB addon card with an angled USB connector to the Lerdge board.
Push the cover on and fix with the 2 longer screws.

IMPORTANT: if you install this, the original 4010 board cooler must be discarded! You'll need to find other